New flueing options for installers

We have introduced a new range of flues for boilers into our product range to make installation of Grant Boilers quick, simple and to reduce cost while insuring trouble free operation even in the most exposed site conditions.

“Blue Flue” is our new single wall stainless steel flue. It can be used as extensions and elbows on our plume diverter kits. The plume diverter kits come in 1 meter and 2 meter kits in 80mm dia and 100mm dia. The Blue Flue is also compatible with all Grant Condensing Boiler House models when the flue has to pass through a non combustible material i.e. a concrete roof and there is an adequate permanent air supply.

“Red Flue” is our new stainless steel flexible balanced flue solution to nuisance plumbing and cold draughts. It is designed for Grant condensing boilers up to 26kw (90000btu) and allows an existing masonry chimney to be utilised rather than re-site the boilers and pipe work. It comes in lengths of 6,8,10 and 12 meters and extensions and elbows are available.

“Yellow system” – we have introduced a short low level flue kit that goes from 270mm-350mm and will help installations where a shorter flue pipe going out through the wall is required.

Download our new Flue guide for full information.